The operation could not be completed because of an internal error with the serial port.
The modem is not responding.
Be sure it is turned on and connected properly.
The attached modem is not compatible with this software. Turn on the "Use reduced command set" option and try again.
The modem connection has been broken.
The other system may have hung up the phone.
The carrier was lost while attempting to negotiate an error-controlled protocol with the remote modem. The remote modem may be objecting to your modem protocol settings.
Feature negotiation failed to detect the presence of an error-control modem at the remote end. Your current settings require an error-controlled connection.
The negotiation for an error-controlled connection with the remote modem failed. Try setting the feature negotiation option to None.
An error-controlled connection could not be established because your modem supports only asynchronous connections and the remote modem requires synchronous.
An error-controlled connegtion could not be established because the local and remote modems could not agree on either a synchronous or an asynchronous connection.
An error-controlled connection could not be established because the local and remote modems do not have any error-correcting protocols in common. Verify your modem protocol settings.
An error-controlled connection could not be established because the remote modem responded with unknown negotiation information. Try setting the feature negotiation option to None.
The negotiation for an error-controlled connection with the remote modem failed. The remote modem may not be responding or may be objecting to your modem protocol settings.
The modems failed to negotiate an error-controlled connection. Make sure your modem protocol options are correct, or that they permit an asynchronous connection.
The error-controlled connection was terminated because the remote system did not respond after a prolonged period of time.
The error-controlled connection was terminated normally at the request of the remote system.
The error-controlled connection was terminated because there were excessive frame retransmissions. You may have a poor phone connection or the remote equipment may have failed.
The error-controlled connection was terminated because the remote modem violated the protocol rules.
